STAVES FOR CARDING MACHINE

 

Technical Order Sheet

 
   
 


 
Machine Make : Model Type :
Company Name & Address : Contact Person (s)/Deptt :*
Telephone :

Telephone :*
Fax : Fax :
E-mail : E-mail :*
       
 
Please tick one
BEECH WOOD ALUMINIUM LAMINATED WOOD
 
1
TYPE OF COVER
2
WIDTH OF ROLLER
3
DIAMETER OF ROLLER
5
NO. OF ROUNDS
6
THICKNESS OF STAVES
7
ANGLE OF PINS(A)
8
NO. OF ROW OF PINS
9
PINS PER ROW
10
DIAMETER OF PINS
11
OVERALL LENGTH OF STAVES
12
FACING OF STAVES
13
PROJECTION OF PINS(P)
14
TOTAL NO. OF STAVES REQUIRED
 

1. When your order size hole to screw and spacer must also be shown.
 

2. If full bar aluminum give the number of machine and the name of manufacturers.
 

3. In Col.4 please give the number of brought to represent an arm of the ring round.
 

4. In Col.5 please give the number of complete series which are required to meet all of roll.
 

5. In Col.7 of angle is necessary to the line of the axial pin made with the tangent to the surface of the spans(The sketch A DANS).
 

6. In the neck 10, it is preferable to the diameter and thousandths of an inch. If not available, the state gauge.
 

7. In Col.13 projection should be measured along the axis of the pin(P"DANS sketch).